Popular PATRIOT chainsaws: characteristics, reviews, videos

Manufacturer country

The homeland of the Patriot brand is America. Today, the bulk of chainsaws are produced in China. This is due to the increase in the dollar exchange rate; before the jump, all saws were produced only in the USA. Now chainsaws are produced only in China and Russia. Yes, saws are also assembled in Russia.

Patriot chainsaws first appeared in Russia in 1999, when there were only two models on the market. Now the list has expanded significantly; in this article we will focus only on the best tools that have gained good popularity among buyers.

Once an article was published in the press about the production of Patriot chainsaws in Russia, and so, they noted the fact that the percentage of defects in production is very low, amounting to only 0.1% of the total number of products produced. This is a really good indicator. Apparently, this is due to the fact that each chainsaw at the factory undergoes manual quality control.

Design Features

Patriot chainsaws do not have such rich equipment as, for example, Shtil or Husqvarna saws. After all, this is just a “good Chinese” put on an assembly line. However, saws have a number of serious advantages in comparison with their competitors from China:

On the piston of all saws, without exception, two oil scraper and compression rings are installed;
chrome-plated working surface of the cylinder;
The connecting rod and piston group (SHPG) are made of forged steel.

These 3 points give Patriot chainsaws a reliable engine, which significantly increases the service life of the tool.

Carburetor adjustment

The carburetor adjustment on the Patriot chainsaw was done at the factory using special devices and instruments, and is not required in the future after purchase. It is needed only in case of tool failure.

The carburetor is adjusted by rotating three screws: quality, quantity and idle speed. The ideal tuning condition is considered to be maximum engine power in relation to minimum fuel consumption.

If for some reason you need to adjust the carburetor, we recommend that you read the informative article - a guide on adjusting the carburetor on Partner chainsaws.

Don’t forget, a prerequisite for tuning is a clean air filter and a warm engine.

Adjusting the Patriot Chainsaw Carburetor

Content

Do-it-yourself chainsaw carburetor adjustment

For an independent carburetor option, you need to familiarize yourself with its structure and understand the procedure for the work that is carried out to adjust the parts responsible for the proper functioning of the components of the device and parts close to it.

It is necessary to carefully handle items for the system option, and also to determine whether the set characteristics correspond to very acceptable values.

About the carburetor design

The carburetor serves to mix the flammable mixture with air while maintaining predetermined proportions. If clear doses are not followed, the proper operation of the engine is at risk. When a huge amount of air enters during mixing of the components, but there is not enough fuel, then such a mixture is considered “lean”.

Oversaturation should not be allowed, because with a larger amount of fuel compared to air, malfunctions or engine wear are also likely. Carburetor adjustment is needed not only before initial use, but also when any differences in its operation are detected. Before working with a chainsaw, do not forget to run it in.

Carburetor components

The carburetor design contains a standard set of parts, but may vary little depending on the manufacturer. Components:

The basis . This is a special tube that is visually similar to an aerodynamic design. Air passes through it. In the transverse direction, a damper is located in the middle of the pipe. Its position can be changed. The more it is extended into the passage, the less air enters the engine.
Diffuser . This is the constricted part of the tube. With its help, the air supply speed increases precisely in the segment from which the fuel comes out.
Channels for fuel supply. The fuel mixture is contained in the float chamber, then passes into the nozzle, from which it flows into the atomizer.
Float chamber . It is a separate structural element, reminiscent of the shape of a tank. Designed to constantly maintain the optimal level of fuel fluid before entering the channel from which air enters.

Don't know which chainsaw to choose? Read our article.

Are you looking for cheaper models, but reliable and time-tested? Pay attention to Russian-made chainsaws.

Or explore foreign chainsaw manufacturers such as Shtil.

What you need to have for setup

Each carburetor owner must have the necessary tools to adjust this system. There are three adjustment screws that are located on the body of the device. They have their own markings:

L - screw for correcting low speeds.
H - screw for adjusting high speed.
T - regulates idle speed, in most cases used for experiments.

READ Chainsaw device Shtil 180 Diagram

Chainsaw air filter

Before adjusting the carburetor, you need to prepare the device:

The engine warms up, that is, it starts about 10 minutes before repairs, and turns off when starting work (see how to start a chainsaw).
The air filter is checked and washed.
The chain is stopped by turning screw T until it stops (see chain oil).

To carry out a safe repair, you need to prepare a flat surface where you can carefully place the device and turn the chain in the opposite direction. Need a tachometer. It determines whether there is a malfunction in the carburetor. When turning the screws, the sound should be perfect and absolutely smooth. If you notice squealing notes, the mixture is oversaturated.

Setup instructions

Carburetor adjustment is divided into two main stages. The first one is called basic. It is performed with the engine running. The second is performed when the engine is warm.

To carry out the carburetor setup procedure successfully, you need to read the operating instructions for a specific model in advance to identify additional features of setting up the device.

First stage

The adjusting screws for the highest and lowest speeds should be moved clockwise until the highest resistance is met. When the screws reach the stop, you need to move them in the opposite direction and leave them 1.5 turns.

Main stage

Chainsaw Partner. Carburetor repair, adjustment.

Chainsaw won't start

Partner.
Carburetor
for 7 bucks, disadvantages, how to fix.

“PARTNER 350” Correct carburetor adjustment.

chainsaw malfunction

I FORGOT TO SAY IDLES NEED TO BE SET.

The engine is turned on at medium speed and warms up for about 10 minutes. The screw responsible for adjusting the idle speed should move clockwise. It is released only when the engine reaches stable operation mode. It is necessary to ensure that the chain does not move during this process.

In idling mode, the engine may stall (the reason is here). In this case, you must immediately turn the adjusting screw clockwise until it stops. Sometimes the chain starts to move. In this case, turn the adjusting screw in the opposite direction.

Checking acceleration operation

Need to do a little research. Acceleration of the device is initiated. It is necessary to evaluate the proper operation of the engine during maximum speed. When the engine is functioning correctly, it means that when you press the accelerator, the speed quickly increases to 15,000 rpm.

READ Chainsaw Starts and Stalls Immediately

If this does not happen or the increase in speed is too slow, you must use the screw marked L. It turns counterclockwise. Moderate movements must be observed, since the turn cannot be more than 1/8 of a full circle.

Maximum number of revolutions

To limit this indicator, you need to use a screw marked H. To increase the number of revolutions, turn it clockwise, and to reduce them in the opposite direction. The maximum frequency should not exceed 15000 rpm.

If you make this figure larger, the device’s engine will wear out, which will lead to problems in the ignition system. When rotating this screw, you need to take into account the ignition processes of the device. If the slightest malfunctions appear, then the maximum speed value must be reduced.

Final check at idle

Before this procedure, it is necessary to carry out a full adjustment of the carburetor components when operating at maximum speed. Next, you should check the functioning of the device in idle cold mode. When the correct adjustment parameters are achieved, you will notice that the carburetor design closely matches the following criteria:

When the idle cold mode is activated, the chain does not move.

Chainsaw accelerator

When the accelerator is pressed even slightly, the engine accelerates at an accelerated pace. With gradual deepening of pressure, you can notice that the engine speed increases proportionately, reaching the maximum permissible values.
When the engine is running, you can compare its sound to a four-stroke device.

If violations are noticed in the given parameters or the device has not been fully adjusted, you need to perform the main setup step again. Sometimes actions are performed incorrectly. In this case, the device may fail due to the loss of the correct node settings. In this case, you will have to contact a specialist.

Disassembling the carburetor if necessary to check or repair components

The design of different carburetor models is almost the same, so when working with them you can use the standard scheme. All elements must be removed carefully, and then laid out in the order given below , so that you can successfully place the items in place after the completion of the repair work.

Removing the Top Cover

The top cover is removed. To do this, you need to unscrew the 3 bolts holding it in a circle.
The foam rubber is also removed, since it is the upper component of the filter that conducts air.
The fuel hose is removed.
The drive thrust is output directly to it.
The cable end is disconnected.
The gasoline hose can be completely removed if you systematically pull it off the fitting.

To finally prepare the carburetor for major repairs or replacement of the smallest parts, you need to carefully disconnect it from the main system . Sometimes further disassembly is required. You should unscrew the components carefully and put the fasteners in groups, as these small parts are easily lost.

READ How Much Oil to Put in a Shtil Chainsaw

Instructions for Chinese

To correctly configure the carburetor of a Chinese chainsaw, you must first remember the factory settings of the device, then turn on the engine. Subsequently, you will have to leave it running for several hours in order to accurately set your own parameters. Sometimes work is carried out only after ten minutes of engine operation, but many Chinese-made models require special handling.

Chinese chainsaw model

Adjustment procedure:

Activities begin in idle mode . Using the adjusting screws, you need to achieve a systematic increase in engine speed, so you should first let it run at low speeds. A deviation from the norm is the movement of the chain along the bus. In this case, you need to adjust the outer screws to the optimal position so that the chain remains motionless.
The transition to medium speed speed is carried out . Sometimes the engine starts to smoke. This defect can be eliminated by tightening the screw to supply a leaner fuel mixture.

In this case, the smoke will disappear, but the engine speed will increase. You need to adjust the settings until you reach a level where, when you press the throttle, the engine smoothly picks up speed, and no sudden jerks or interruptions are heard.

The device's engine is being checked . The chainsaw is switched to minimum speed, and then the lever is quickly pressed. When pressed maximally, it is held for 3 seconds. If there are problems with the engine, you need to gradually loosen the screw until the optimal position is reached.
The chainsaw should work for several hours in real conditions . You need to cut wood, and then inspect all the elements involved in this event. If there are deviations, they must be corrected using adjusting devices. When all defects have been eliminated and the optimal settings have been established to supply correctly concentrated fuel, the device setup process can be considered complete.

Take a look at the video:

Conclusion

In order for the chainsaw to work properly, you need to carefully carry out the work of adjusting the carburetor in exact accordance with their order. If any malfunctions occur in the operation of the device, you must completely disassemble it yourself. In most cases, replacement of any parts that have become unusable is required.

By constantly checking the quality of carburetor settings and taking timely actions to improve its operation, problems with the chainsaw will not arise.

Read about which chainsaw to choose here.

Patriot lineup, review of the most popular chainsaws

The Patriot model range consists of household chainsaws. They are not intended for daily, long hours of use. Patriot positions some of the tools in the line as professional and semi-professional, but remember, there are neither of those in the lineup. None of them will withstand heavy loads, because... they are simply not designed for it. If you need a professional tool, it is better to turn your attention to saws such as Shtil 880 or Husqvarna 365.

Based on customer reviews and sales statistics, the best-selling Patriot chainsaws are: PT 3816, PT 4518, PT 5220.

Chainsaw Patriot PT 4518

Saw for the household segment. It is sold under two names: Patriot PT 4518, Patriot PT 4518 Imperial. These are absolutely identical chainsaws, there are no differences in them. The appearance of several names is associated with the company’s marketing moves.

Among the advantages, it is worth noting the powerful 2.1 kW engine. The working volume of which is 45 cubic meters. see. To start a displacement engine, engineers have provided an easy start system - EasyStart. It significantly reduces the starting force thanks to an additional spring in the starter.

The disadvantage is the weight. Without refueling and saw accessories, the weight of the tool is 6.5 kg. This is a lot for a household class.

According to numerous reviews from real owners, the chainsaw easily copes with cutting large-diameter wood.

You can read more about the tool in a detailed review of the Patriot 4518 chainsaw, published on our website.

To see how the chainsaw works visually, we recommend watching this interesting video:

Semi-professional chainsaw Patriot PT 5220

The word semi-professional does not mean that it can be used 8 hours a day and 7 days a week. This only means that the chainsaw is powerful and can easily cut trees of large diameters every time. More than 40-45 cm.

The chainsaw has a 2.5 kW (3.4 hp) engine with a capacity of 52 cc. see. Just like 4518, it comes with an EasyStart system for easy starting. The manufacturer claims that this system reduces the load during startup by 60%. Time has shown that, for all its power, the engine has a reduced service life and high fuel consumption.

Adjusting the Carburetor of the Patriot 3816 Chainsaw with Your Own Hands

Content

Reliable Chinese chainsaw Patriot PT 3816

Let's talk about the Patriot 3816 chainsaw, consider its purpose and characteristics. After reading the article, you will learn how to independently adjust the carburetor and troubleshoot problems that may occur in the chainsaw during operation.

IMPORTANT. An experienced electrician leaked the secret to the network on how to pay half as much for electricity legally. Read more

Application of Patriot PT 3816

Patriot PT 3816 is a non-professional chainsaw model and is intended for private use. For example, Patriot 3816 will cope with tasks such as annual collection of firewood in small volumes, trimming tree branches in the garden, and reducing waste. In addition, the saw is used in fence construction to cut wooden posts.

The Patriot 3816 saw cannot be used by deforestation professionals due to resource constraints. The chainsaw parts are made well, but they are not designed to work in harsh conditions for long periods of time. The engine cylinder is entirely aluminum, which means it is resistant to long-term operation and even slight overheating. If the Patriot 3816 installs a chrome plated cylinder, the engine life will increase from time to time.

If you take a close look at the Patriot 3816, you will immediately see its resemblance to typical Chinese chainsaws.

We invite you to watch a video about the Patriot PT 3816 chainsaw, in which the owner shows the equipment and explains the main characteristics.

Characteristics of Patriot PT 3816 and its description

The number 3816 is indicated in the marking, this means that the chainsaw has a 38 cm 3 engine and the bar length is 16 inches (40 cm).

READ Chainsaw 180 No Gasoline Supply

This volume is enough to produce two horsepower, which together with 12,000 rpm gives good performance. The Patriot 3816 is equipped with a carburetor with the ability to adjust the quality of the mixture and a good air filter that, if necessary, can be washed in soapy water, and nothing will happen to it.

The slot width for installing the chain is 1.3 millimeters, the chain and drive sprocket have a pitch of 3/8 inch, the length of the chain. 57 links.

If necessary, the chainsaw can be equipped with a different bar, chain and drive sprocket, the design of the Patriot 3816 allows this.

The body is made of plastic, the parts, although not bad, are installed, but they have gaps that immediately catch the eye. The quality of the plastic is much lower than that of a Stil or Husqvarna chainsaw. When the chainsaw is running, there is strong vibration, the reason is the shock absorbers, which are made of hard steel and do not cope with their intended functions.

The shock absorbers on this chainsaw are made of poor quality steel and break quickly, so when using the Patriot 3816 actively, it is necessary to have at least one spare shock absorber in stock.

Chainsaw Partner. Carburetor repair, adjustment.

Chainsaw won't start

Partner.
Carburetor
for 7 bucks, disadvantages, how to fix.

Chinese chainsaw. Carburetor repair and adjustment. Carburetor diagnostics.

Chinese chainsaw

.Diagnostics and repair.
Carburetor repair
.
Carburetor adjustment
.

For operator convenience, the tension adjusting screw is removed from the side cover, which is very convenient and safe, since it eliminates the possibility of cutting out the chain teeth when pulling it out.

The starter of this model is equipped with an additional spring, which reduces the effort required to crank the engine and start the engine.

Frequent failures of the Patriot PT 3816 chainsaw and self-repair

As mentioned earlier, the shock absorbers on the Patriot 3816 are prone to failure. They are easy to replace. It is enough to unscrew the two screws holding the shock absorber, remove the faulty part and install a new one.

READ Idle Speed Adjustment on Husqvarna 137 Chainsaw

Another common problem with the Patriot 3816 is a broken clutch spring. This is not that difficult to diagnose because the chainsaw chain will spin constantly, and the saw will stop if you put the bar on a piece while idling, trying to stop the chain from spinning.

To replace the clutch, you need to remove the top cover of the engine and unscrew the spark plug, then through the spark plug hole with a lace to stop the piston from moving. Next, you need to remove the side cover, chain and bar from the chainsaw, thus allowing access to the clutch. After that, using a special wrench (you can use a wrench from a grinder), unscrew the coupling.

The coupling has a reverse thread, so it unwinds clockwise.

Reassemble the saw in reverse order.

The nuances of carburetor adjustment

3816. The same thing can be found on many Chinese chainsaws.

Adjusting the carburetor with your own hands is only possible if you have certain experience and knowledge. The setup algorithm looks like this:

when the engine is turned off, the quality and quantity screws are screwed to the stop, then they come out 1.5 turns each;
The chainsaw turns on and heats up within a few minutes;
rotation of the screw “L” (the designation is on the carburetor body and is duplicated on the saw). this is the position in which the engine develops maximum speed, then turns ¼ turn;
Screw (H) is tightened until the saw produces maximum speed at full throttle, then it also becomes 1/4.

Adjusting the carburetor, although not a very complicated procedure, should be performed only after a complete inspection of the chainsaw and elimination of all existing engine defects (air intake, fuel leaks, failure to breathe), so we recommend contacting an experienced tuning technician.

READ Chain Sharpening Machine for Benzos and Electric Saws

User guide

The chainsaw comes with an instruction manual, after reading which you can learn how to properly install the bar and chain.

You can also see the algorithm for setting up the saw for storage. By following the manufacturer's recommendations, you can significantly extend the service life and eliminate damage to the chainsaw if it is used incorrectly.

Reviews of Patriot PT 3816

Alexander. 32 years. Barnaul.

3816. my first chainsaw. I bought it on a neighbor's recommendation about a year ago. The wound drank well and drank. I tried to see large tree trunks, sufficient power. The saw hasn't broken yet, I try to follow and perform cleaning and maintenance according to the manufacturer's instructions.

Anatoly. 30 years. Perm.

I bought a Patriot PT 3816 for gardening. I immediately noticed that it was quite heavy, but after a little work I got used to the weight and didn't feel it anymore. It starts great both cold and hot. Over the course of two years of use, I cleaned the air filter several times and changed one shock absorber, because the old one burst, the saw began to dangle and itself was on the gas. I am happy with my chainsaw and would recommend it to anyone who needs a reliable tool for work around the house.

Conclusion

Patriot PT 3816 is a high-quality Chinese chain saw that is guaranteed to deliver value for money. Of course, it cannot be compared with saws from leading manufacturers, but given the low cost and good performance, the Patriot 3816 finds its owners.

Garden Home line

In 1999, when Patriot chainsaws appeared on the Russian market, they were sold under the Garden Home brand, because... the manufacturer could not be under its own brand. The Garden Home company became a kind of guide for Patriot to the Russian market. In 2013, the Patriot company was able to sell tools under its own brand, after which the phrase Garden Home completely disappeared from the name of chainsaws.

We often receive questions from our visitors asking us to explain how the Garden Home series chainsaws differ from the Patriot series. The answer is nothing! This is all done for marketing and legal reasons.

Owner reviews of the Patriot chainsaw

We present to your attention the reviews left by our site visitors through the comment form on the article. They received a place in the sun (in the article) for their informativeness and usefulness. If you disagree with something in the reviews or, on the contrary, want to complement it, write and share your opinion.

I bought a Patriot 4518 chainsaw several years ago, during all this time I only changed the bar and chain 2 times. I consider these to be consumables, so I can say that they didn’t break. Chain oil is only branded, no waste. The downside is the cold start. It’s hard to start in cold weather, it’s not clear why this is connected, I searched through a lot of information, but I still haven’t found an answer. In the summer it starts without problems. I bought a chainsaw on the advice of a neighbor, he has been using this for 4 years and also has not done anything with it.

Evgeniy, Tver

This is the second Patriot chainsaw on my farm; the first 5220 was bought out of the blue, without thinking. It is really heavy and can only cut thick trees. It weighs more than 10 kg, after half an hour of work you begin to understand that you have in your hands a whole machine from the times of the USSR called Druzhba. Therefore, I only use it for preparing firewood. The second Patriot chainsaw in my household was the Patriot PT 3816: light, unpretentious and not expensive. Excellent for preparing firewood from slabs.

Maxim, Penza

Operating and maintenance instructions

Rules for operation and maintenance of the Patriot pt 3816 chain saw, according to the manufacturer’s instructions:

Before setting up and assembling the instrument, read the instruction manual;
fill the saw with a mixture of gasoline and oil in a ratio of 1:50;
regularly clean the chainsaw from any remaining shavings, monitor the condition of the chain, bar, and the supply of oil and lubricant to the chain;
Safety precautions for using Patriot pt 3816 include fabric gloves and a protective mask.

Patriot PT 554 PRO – description of the chainsaw

When choosing universal Patriot chainsaws, buyers often prefer the PT 450 PRO model. Among its advantages, the design includes a proprietary system for faster and smoother engine starting, as well as a carburetor heating device for the ability to operate at extremely low temperatures.

Thanks to its simple design, even a beginner can repair this Patriot model. The saw does not require special maintenance, however, to extend its service life, you should follow the instructions in the operating instructions. The main technical characteristics of the Patriot gasoline tool include:

Power – 3.5 l. s./2500 Watt;
Standard tire size – 50 cm;
Saw chain pitch – 0.325 “;
Fuel mixture tank – 530 ml:
Oil reservoir – 320 ml;
Finished weight – 9 kg.

The delivery set, in addition to the Patriot chainsaw itself, consists of a tire, saw chain, documentation, a set of tools for servicing the saw and accessories to protect the operator.

Chainsaw Patriot 3816 operating instructions fuel mixture

Download

Description – Chainsaw PATRIOT 3816 –

Buy a Patriot Garden 3816 chainsaw in the characteristics and instructions for the fuel mixture. instructions for operating a chainsaw with a fuel mixture. Canister for mixing the fuel mixture for operation of the patriot 3816 chainsaw. PATRIOT 3816 chainsaw 555-87-78 Free call for Husqvarna fuel mixture 1. PATRIOT RT 3816 chainsaw Designed for household, occasional use in the garden. Chainsaw Hammer BPL3814 LE reviews: 13 pcs., instructions for 1 pc. Container for mixing fuel. Sale of reliable Patriot chainsaws in the store. Home About us. Buy patriot RT 3816 chainsaw with instructions, container for mixing the fuel mixture. Let's talk about the Patriot 3816 chainsaw, Operating Instructions. The sounds of a chainsaw are given optimally in order of fuel in the fuel mixture at. Container for mixing the fuel mixture. Chainsaw patriot RT 3816 during operation and. Chainsaw PATRIOT PT 3816 Imperial 220105515 at a price of 5,990 rubles in the VseInstruments.Ru online store.

Gasoline for a chainsaw: which one to use? |

DIY chainsaw repair

Patriot RT 3816 Chainsaw, instructions, support, forum, description, manual, manual. Chainsaw Patriot RT 3816 220105510 buy at a price of 6,540, reviews, photos, instructions, specifications. You can buy a patriot patriot 3816 imperial chainsaw according to the fuel mixture, instructions for. Comment: the main differences from the previous version 3816 are the absence of a softstarter. And this is good. Chainsaw patriot pt 3816 (220105510) PETROL SAWS Chainsaw patriot pt 3816 (220105510) Product guide. Operating instructions for Chainsaw Patriot pt 3816. mixtures; Instructions for. Instructions for patriot pt 3816. saws patriot Chainsaw patriot pt 3816 instructions for it. Download instruction manual. Chainsaw Lesnik pt 3816 fuel mixture. Operating instructions for chainsaw forester 3816. User manual Instructions for. Buy chainsaw PATRIOT PT 3816 Imperial 220105515 in Ulyanovsk at low prices. Pullers for fuel. Chainsaw Patriot PT 3816 Imperial - buy in the online store Tekhnostor.ru at a competitive price from. Customer reviews of the product Chainsaw patriot RT 3816 (instructions) fuel mixture. Chainsaws, gas cutters. Selection by price. Compare on Price.ru and buy profitably! Patriot PT 3816 chainsaw reviews, instructions, buy by fuel mixture. Comment: the main differences from the previous version 3816 are the absence of a softstarter. And this is good. Buy chainsaw PATRIOT PT 3816 Imperial 220105515 in Nizhny Novgorod at low prices: description, reviews. Before pouring the mixture into the fuel tank, operate the chainsaw according to the instructions. Fuel mixture mixing proportions. then pure gasoline into the chainsaw in the instructions. Links to reviews of the patriot pt 3816 model in 1:32 oil according to the fuel mixture instructions. Chainsaw patriot pt 4016 priced from 6,490 rubles online Fuel extractors. Buy Patriot PT 3816 chainsaw at a low price, oil 1:32 according to the instructions, fuel mixture. This Patriot chainsaw, if you follow the instructions in the Operating Instructions pt. Repair instructions for the patriot garden rt 3816 chainsaw. Fuel mixture instructions. assembly instructions. I received a not quite serviceable fuel mixture Patriot 3816 with Easy start, not Buy Chainsaw PATRIOT PT 3816 Imperial 220105515 in Chelyabinsk at low prices Pullers for fuel. Chainsaw Patriot Garden 3816 buy in Omsk at a low price in the E96 online store with home delivery.

Customer reviews about the PATRIOT model

Chainsaw Patriot Garden 3816 - price,

Patriot 3816 chainsaw with a container for mixing the fuel mixture Buy Patriot chainsaws at. Chainsaw Patriot PT3816 in Proper fuel quality based on selection and operation. Chainsaw patriot 3816 available in stock, during operation and fuel mixture. No fuel mixture chainsaw repair instructions. operating a chainsaw. User manual; for mixing the fuel mixture, Patriot RT 3816 Chainsaw. When purchasing a Patriot Garden 3816 Chainsaw in our store, you can count on: operational. What is a trimmer? fuel mixture; Chainsaw patriot pt 3816 manual.Instructions. Universal chainsaw Patriot PT 3816 Imperial during operation and fuel mixture.

Chainsaw Patriot

Gasoline for a chainsaw: which one to use? |

Zyrtec instructions for using drops for children

Acc instructions for use reviews analogues

Diabenot instructions for use reviews analogues

Tsindol instructions price

Customer reviews about the PATRIOT model

Artra tablets instructions for use

Ibuprofen suppositories for children instructions for use

Gepatrombin g suppositories instructions for use reviews

Dress pattern for beginners step by step photo instructions

Chainsaw Patriot

Instructions for using the crimper in Russian

L.cet instructions

Actilyse instructions for use

Chondartron instructions for use for dogs

Patriot PT 2512 – areas of application and design of the chainsaw

The Patriot chainsaw in this modification is in great demand among owners of small garden plots. The saw performs well when trimming branches, removing bushes, and sawing small logs. Thanks to its light weight and modest dimensions, this Patriot model will be convenient when used at heights.

The design of the tool includes a reliable 2-stroke engine that does not require a large amount of fuel mixture to operate, a high-quality carburetor with an extended float chamber, and a pump for automatically supplying oil to the chain. Technical parameters of the model include:

Power – 1.3 l. s./970 Watt;
Standard tire size – 30 cm;
Saw chain pitch – 3/8 “;
Tank for supplying fuel mixture – 250 ml;
Lubricant tank – 150 ml;
Assembled weight – 5.5 kg.

The delivery set includes a Patriot chainsaw, documentation, a set of tools and a container for preparing the fuel mixture.

Operating and maintenance instructions for the Patriot pt 3816 chainsaw

The instruction manual for the Patriot pt 3816 chainsaw contains important information about setup and operating principles for the owner. It is advisable to maintain the factory carburetor adjustment throughout the entire break-in period, that is, about 5 working hours. After break-in, you can, if necessary, adjust the carburetor yourself. A description of how to adjust the Patriot chainsaw is also indicated in the instructions.

Basic rules for the safe operation of the Patriot pt 3816 chainsaw:

the place where the chainsaw is refueled with the fuel mixture must be removed from sources of fire, gas, and sparks;
gasoline and oil must be mixed in a ratio of 1:25, according to the manual for the tool;
when working with a chainsaw, use protection - a mask, headphones, glasses, gloves;
When transporting the chainsaw, use a protective cover for the tire;
Never work longer than the specified time, do not allow the engine to overheat.

First launch of the Patriot 3816 chainsaw

Maintenance of Patriot pt 3816:

regularly inspect the device after use;
monitor the condition of the chain, eliminate irregularities on the chain in a timely manner or replace it;
lubricating oil must be constantly present in the crankcase;
Adjust the carburetor once a year;
as necessary, the chain is tightened, filters are cleaned, spark plugs are replaced.

Patriot PT 3818 – pros and cons of a chainsaw

This Patriot chainsaw is perfect for regular use for all kinds of household needs. The saw copes well with sawing beams, preparing logs and processing boards for repairs and construction.

Among the advantages of this Patriot model, it is necessary to highlight its light weight (for a semi-professional saw), modest fuel consumption and ergonomic design. Experts include the disadvantages of the chainsaw as a flimsy body, poor balancing of the structure and a poor-quality air filter. Key specifications for the 3818 include:

Power – 2 l. s./1500 Watt;
Standard tire size – 45 cm;
Saw chain pitch – 3/8 “;
Fuel reservoir – 310 ml;
Chain lubrication tank – 160 ml;
Working weight – 8 kg.

The delivery set of the Patriot chainsaw consists of a set of tools, a bar and a saw chain.

Review of the Patriot 3816 chainsaw

Today, one of the most popular manufacturers of gasoline equipment in our country is Patriot. Along with cultivators and walk-behind tractors, chainsaws from this manufacturer are widely used. This equipment is characterized by good technical performance, reliability and durability, and, last but not least, affordable prices. One of the most popular models is the Patriot 3816 chainsaw.

General information and opportunities.

The Patriot 3816 chainsaw belongs to the household category and is perfect for infrequent use in the country house or garden. This model is distinguished by fairly compact dimensions and low weight - only 4.9 kg. Thanks to its successful design, the chainsaw is very easy to maintain: getting to the air filter and spark plug is no problem, just remove the cover from the tool body. The vibration damping mechanism on the chainsaw handle makes work more compact.

The main area of application of the Patriot 3816 chainsaw is the preparation of firewood and sawing of small trees. Cutting with this saw is easy and quick. The saw's fuel tank capacity is 0.31 liters, which allows the saw to operate for 40-45 minutes on one fill-up. It is important to note that after continuous operation for the specified period of time, the saw should be allowed to rest for 15-20 minutes to avoid overheating of the engine.

Engine.

The 3816 chainsaw uses a two-stroke Patriot engine with a power of 2 hp. and a working volume of 38 cubic centimeters. Patriot Garden engines have long established themselves as reliable and durable. The fuel used is a mixture of AI-92 gasoline and two-stroke engine oil. It is very important to remember that the mixture must be made strictly according to the proportion established by the manufacturer, namely 1:32, that is, 32 grams of oil per 1 liter of gasoline. In addition, the manufacturer strongly recommends using only Patriot oil. It is ideal for long and reliable engine service. For faster starting of the engine, the saw has a primer.

Tire and chain.

The Patriot 3816 chainsaw is equipped with a bar 40 cm (16 inches) long, chain pitch – 3/8, number of links – 57, link thickness – 1.3 mm. It is worth noting that an automatic oil supply system is used to lubricate the chain, sprockets and bar on the saw. Contrary to popular belief, to lubricate the bar and chain, you should definitely use special oil, and not regular car oil. This will significantly increase the service life of both the chain and bar.

It is worth noting that the tire length - 40 cm is optimal in many respects. It is much more convenient to work with this than with a 45 cm or 50 cm tire, due to its lightness and compactness. At the same time, this option is not significantly inferior to them in terms of performance. For operator safety, the 3816 chainsaw is equipped with protection against accidental start-up, as well as a saw chain brake.

So.

The Patriot 3816 chainsaw is an excellent option for home use. A lightweight, but at the same time quite powerful model with a vibration damping system allows you to cut firewood and fell small trees quite easily and quickly. The saw is easy to maintain and reliable in operation. In addition, it is worth noting that, along with other saws, the Patriot 3816 chainsaw has an affordable price, which is important for people who do not plan to overpay for a well-known brand. In short, this model is the optimal combination of price and quality.

Patriot PT 4016 – chainsaw features

This Patriot chainsaw is used primarily for felling small and medium-sized trees, harvesting logs for heating private houses and cottages, and preparing wood before construction.

Among the design features of the tool, one should highlight good balancing of parts, the presence of mechanisms to facilitate starting the motor, and an effective inertia brake. The handles and switches of the chainsaw are located in a place convenient for the operator, which significantly increases comfort when working with the tool. The main technical characteristics of the Patriot chainsaw include:

Power – 2.2 l. s./1630 Watt;
Standard tire size – 40 cm;
Saw chain pitch – 3/8 “;
Fuel supply tank – 310 ml;
Oil tank volume – 150 ml;
Ready-to-use weight: 7.2 kg.

The delivery set consists of a Patriot chainsaw, documentation, a canister for preparing the fuel mixture and a set of keys.

Review of Patriot Pt 3816 Chainsaw

The hero of the review is the PATRIOT PT 3816 chainsaw Link to product: Download the instructions, look at reviews and buy PATRIOT PT 3816 by clicking on the link below: Also on the website you can see the full set, technical specifications and find out all the information about the product. Good afternoon, dears Friends! We present to your attention the Patriot PT 3816 chainsaw. This is a powerful tool for home needs that will do an excellent job of trimming bushes and small trees. The design makes the controls easy to understand and allows you to work in hard-to-reach places. This line of Patriot chainsaws features a chain brake that will instantly stop the chain in unexpected situations and lock the throttle to prevent accidental operation. Patriot 3816 Specifications . Tire length: 40 cm; Power: 2 horsepower; Engine capacity: 38 cubic centimeters; Power: one and a half kilowatts; Saw class: households; Fuel tank capacity: 0.31 liters; Oil tank capacity: 0.21 liters; Noise level: 113 decibels; Weight: 4.8 kg Tire length: 16 inches; Groove width: 1.3mm; Chain pitch: 3/8 inch; Number of references: 57; Spark plug: CHAMPION RCJ6Y; Features and characteristics. Smart control, locking the throttle lever prevents the tool from being started unintentionally. Safety of use: hand protection. This is at the same time a chain brake that will prevent injury when sliding and rigging. Reliability of the design: the cable of the PT 38 16 chain saw is fastened with 4 rivets, which increases its durability. Benefits: A well-balanced center of gravity makes work easier and easier. The large fuel tank allows you to work for a long time without refueling. Internal chromium plating of the metal cylinder walls reduces friction and increases equipment durability. Vibration isolation system. Easy start. Equipment: Tire, chain, cap, key, gloves, glasses, folder, bottle for mixing oil with gasoline. Practical, easy to use and maintain the chainsaw

.
Reliable 2T engine. Advanced anti-vibration system. Balanced design and ergonomic control handle ensure easy operation and precise cutting. Easy access to the air filter and spark plug allows for regular maintenance without the need to visit a service center. The saw is equipped with an automatic chain lubrication system, which prevents overheating of the working parts of the saw and prevents their premature wear and corrosion. In addition, the lubrication system has the ability to regulate the amount of oil supplied to the chain, depending on operating conditions and type of wood. The easy start system saves energy and time with up to 60 percent less effort compared to saws of similar power. Even a fragile woman can drive. Included in the delivery: Protective gloves, glasses for mixing the fuel mixture, chain sharpening files necessary for servicing keys and screwdrivers. More detailed information about the product and consumables can be found on our website via the link in the description. If the video was useful, put your fingers up and subscribe to our channel VseInstrumenty.RuWe on social networks: In these topics we answer your questions: READ How to Replace the Piston on a Stihl 180 Chainsaw

Patriot PT 4518 - description and applications

This Patriot brand chainsaw is used for thinning bushes, cutting dry and wet branches, sawing logs and beams, and preparing boards. This chainsaw is often used by professional tree fellers to clear the trunks of already cut trees from excess branches.

Among the distinctive features of the Patriot chainsaw are good build quality, increased service life and the ability to work stably in difficult conditions. The design of the chainsaw includes a reliable inertia brake for instantly stopping the chain, an adjustable automatic oil supply pump, and a high-quality fuel pump. All mechanisms and parts of the chainsaw are located inside a durable plastic case. Among the technical indicators of the Patriot chainsaw, the following should be highlighted:

Power – 2.9 l. s./2100 Watt;
The length of the standard tire is 45 cm;
Saw chain pitch – 0.325 “;
Fuel tank – 560 ml:
Oil tank capacity – 260 ml;
Ready-to-use weight: 9 kg.

Patriot PT 5220 – design features of the chainsaw

This semi-professional chainsaw from the Patriot brand has proven itself in solving all kinds of household problems of varying degrees of complexity. It is often used by utility workers, rescue workers and professional fellers.

The design of this chainsaw includes a high-quality engine located on 3 vibration-damping shock absorbers, a larger carburetor, an instantaneous inertia brake and a durable fuel pump. Oil is supplied to the chain through a distribution oil pump, which has an adjustment function. Technical indicators of the chainsaw include:

Power – 3.4 l. s./2500 Watt;
Standard tire size – 50 cm;
Saw chain pitch – 0.325 “;
Fuel supply reservoir – 550 ml;
Oil tank – 260 ml;
Assembled weight – 8 kg.

The delivery set consists of a Patriot chainsaw, tools for servicing the bar and saw chain. The country of origin of the Patriot chainsaw is China.

Technical characteristics of the Patriot PT 5220 saw

Engine type - Gasoline;
Power - 2.5 kW;
Power - 3.4 hp;
Cylinder volume - 52 cubic cm;
Fuel tank volume - 0.55 l;
The volume of the lubricant tank is 0.26 l;
Tire length - 500 mm;
Chain pitch - 0.325 ";
There is no power button lock;
There is automatic chain lubrication;
There is no chain brake;
Number of chain links - 76;
The tire groove size is 1.5 mm;
Weight - 6.5 kg;
Warranty - 12 months.

Patriot PT 6220 – description and advantages of the chainsaw

This Patriot chainsaw is a semi-professional garden tool. The peculiarity of this model is its ability to work equally effectively both in extreme heat and in cold weather. The chainsaw is actively used for felling trees in the garden and forest, harvesting large volumes of wood for heating private houses and cottages, as well as for processing wood for repairs and construction. At the same time, the tool consumes a small amount of fuel, and thanks to the presence of an adjustable distribution oil pump, it has a modest lubricant consumption.

The design of the Patriot chainsaw includes such useful options as a reliable inertia brake, an effective vibration damping system, and a proprietary drive lubrication system. The chainsaw body is made of durable plastic and can withstand falls from low heights. The Patriot RT 6220 chainsaw does not require special care; it is easy to operate and repair with your own hands. The main technical parameters of the chainsaw include:

Power – 4 l. s./2900 Watt;
Standard tire size – 50 cm;
Saw chain pitch – 3/8 “;
Fuel tank capacity – 550 ml;
Oil tank volume – 260 ml;
Ready-to-use weight: 7 kg.

The Patriot chainsaw package includes documentation, a set of repair keys, a saw chain and a bar.

Chainsaw PATRIOT

The Patriot brand is a large manufacturer of power tools and garden equipment. Patriot products are very popular in the domestic market, primarily due to the combination of high quality products and affordable prices. The instrument belongs to the semi-professional class, although it is often used by craftsmen at a professional level.

The Patriot chainsaw is a universal tool designed for cutting firewood and felling trees. This device will become an indispensable assistant in a country house or a small forest plot. Also, it should be noted that the Patriot chainsaw undergoes factory testing at all stages of production.

Types and features of Patriot chainsaws

Thanks to the introduction of advanced technologies in production, as well as updating the model range, the Patriot company can present to your attention a wide range of chainsaws. Each model has distinctive characteristics that will guide you in choosing the option that suits you best.

All Patriot chainsaws have a high-performance two-stroke engine with power from 1000 to 2500 W, as well as an anti-vibration system and automatic chain lubrication. The length of the tire on a Patriot chainsaw can be from 30 to 50 cm, and the maximum engine speed at idle can reach 9000 rpm.

In addition to all this, the Patriot chainsaw has a low noise level, ergonomic design and relatively light weight, which reduces the operator's load to a minimum and brings additional comfort to work.

The price of a Patriot chainsaw depends on all of the above factors. The manufacturer guarantees factory quality of products, which is confirmed by relevant documents. Thanks to an extensive network of service centers located throughout Ukraine, you can receive the necessary technical support in the shortest possible time.

Maintenance of the Patriot 3816 chainsaw

Question: Tell me what kind of adjusting screws (3 pieces) are on the Patriot 3816 chainsaw, I understand that this is quality - quantity, but I just don’t know which screw, what it affects and how to adjust it correctly myself. Answer: Make L and H 1.5 turns each. L is low, H is high, T is idle. Question: I’ve been using a Patriot pt 3816 chainsaw for four seasons (2-3 times per season). When I bought it, it didn’t work very well, i.e. The tank worked for the next plant in about 0.5 hours, it won’t work earlier.

Last season it worked without problems, starting with half a turn. Last week I decided to cut it.

I started trying it with some leftover old fuel. It started up once, had difficulty, smoked, and did not gain momentum.

Then the Patriot Garden chain saw stalled and that’s it – it wouldn’t start. There is a spark, the spark plug cannot be called wet, it sneezes occasionally and that’s it. I already removed the air filter and changed the fuel. Sometimes it sneezes into the carburetor and that’s it. Tell me what to do, what to do? The plane of the piston is black, probably carbon deposits. The side is slightly brownish, there are vertical marks (not terrible).

As soon as I removed the muffler and there was a ring in the oil, there was a suspicion that there was something wrong with the fuel supply. I remember before, when it wouldn’t start, I saw that the spark plug was wet, but now it’s as if it was covered with a thin layer of oil. I’ll dry it, twist it, and give it the same tug.

Sometimes he sneezes only when the damper is completely closed. I tried it, unscrewed the top cap on the carburetor, the fuel seemed to be under some pressure. How to check the fuel supply to the chamber? Answer: First you need to remove the muffler and look at the piston. If the piston under the ring is black, the ring may be worn or stuck. We need to try to move it.

If you move and the spark plug is damp, then try to start it with the air damper open and the gas held down. The chrome plating may have fallen off. If the scratches are deep, it may well not start because of this. For good measure, the entire piston needs to be changed. Question: I disassembled the CPG on a Patriot 3816 chainsaw. In my opinion, the condition of the surface of the cylinder and piston is not terrible, it could have done some more work. I wonder how the ignition is set? Answer: The ignition angle is not set. The flywheel sits on a key on the crankshaft. It could, of course, be turned or the keyway could be broken, but it is possible that the magnets are in the right place at TDC.

You can of course remove the flywheel to make sure. But the carbon deposits on the piston skirt are quite large. And there is carbon deposits in the ring groove. The ring was either worn out or lying around.

You need to remove the ring and put it in the cylinder to measure it. The gap should be no more than 0.5 mm. If it is more, it needs to be changed. And the groove must be cleaned. And it must earn. Question: I used a Patriot 3816 saw. After a long period of inactivity, it stopped starting. I was repairing something, it starts but stalls after a couple of tens of seconds, then it won’t start again and can only be started if you pump it up with primer. Which way should I dig? Answer: Try replacing the spark plug and adjusting the carburetor. It is not clear whether the chain saw stalls at idle or when pressing the gas.

Does it suffocate, as if there is a shortage of gasoline, or does it get rich and flood the candle? If the spark plug is dry, then turn the jet L counterclockwise, the idle screw T slightly clockwise. If this does not help, then you need to clean the carburetor and check the fuel line and breather. Question: My Patriot 3816 saw worked correctly for 12 years. In any weather and on any gasoline, but apparently age takes its toll. The drive gear was worn out, but I don’t know how to remove it. I got to the flywheel with the starter, tightened the nut, and then what? Everything seems to be on the same axis. Answer: Then tighten it, install the starter in its place, remove the clutch cover and cylinder cover. Unscrew the spark plug and secure the piston inside the cylinder, for example with a rope with knots.

At the same time, you need to push it carefully so that it does not get into the inlet hole, otherwise, after cutting it with a piston, you will have to disassemble the entire engine. Well, of course, it should be possible to easily pull it out from the inside after the work is completed. If the clutch on the Patriot Garden saw is external, then unscrew it by turning it clockwise with a special key; if you don’t have one, you can make a homemade one from an unnecessary socket head of the required size, cutting out grooves in its side walls, 2 or 3 depending on the number of cams in the clutch, and so that after modification it fits on these as accurately as possible in the center of the clutch.

If the clutch is internal, then simply unscrew the nut securing the sprocket. Unscrew again clockwise. After replacing the sprocket, reassemble in the reverse order. Question: please tell me how to adjust the carburetor of the Patriot 3816 chainsaw? One is designated by the letter “L” and the other by the letter “H” (which one should be unscrewed by how many turns?

I tried it but to no avail, the saw won’t start. I had already disassembled it, washed the carburetor, so I remembered which and how many revolutions to unscrew, but over time I forgot. How to setup? Answer: You need to set it one and a half turns, start it, then adjust “H” and that’s it. Question: I have a Patriot pt 3816 chainsaw. It works fine at idle, but when I start working, after a while it starts to stall. What is the reason and what to check? Answer: Check the fuel filter and flush the carburetor. Question: Please tell me what could cause the sprocket in the tire of the Patriot 3816 chainsaw to overheat? Before the smoke, immediately after starting work.

Lubricant is greased in as usual, special for the sprocket. We swapped the tire for an old spare and the same thing started happening, with the paint bubbling up at the end of the tire. So I’ll buy a new tire, but it will also become charred?

Options - it’s probably time to change the drive sprocket, and the tire too. The pin was unscrewed once by accident, but it was tightened and seems to be holding tightly. Answer: The most likely thing is excessive chain tension on the saw. If the drive sprocket is worn out, the chain tension will “float” - spontaneously increase or decrease.

Try turning it without the chain, it might stick somewhere, there shouldn’t be much play, so wash it in gasoline and then lubricate it again. Yes, the chains, if they are stretched, then maybe the chain tension is too strong.