Design of the Viking 585 motor cultivator
The Viking HB 585 cultivator is powered by a Kohler Courage 4-stroke gasoline engine with a power of 2.3 kW and a rotation speed of 3000 rpm. The XT-6.75 OHV SC engine model has overhead valves. Its working volume is 149 cm3. Moreover, its basis is a forged crankshaft and a liner cylinder. The internal parts of the device are hidden under a hard metal casing. Additional protection is provided by polymer linings on the sides of the structure.
The Viking HB 585 cultivator has 2 gears, one for each direction of movement - forward and reverse. The trajectory of movement is changed by a height- and width-adjustable handle made in the form of a steering wheel. The device is convenient to use because it has a relatively light weight (46-49 kg depending on the configuration), adjustable working width and the ability to rotate using the steering wheel. The plowing depth is 32 cm. The Viking HB 585 cultivator is started manually using a cable.
The transport wheels are located at the back and are foldable, which is convenient to use. There is also a brake spur, which allows you to regulate the speed and depth of plowing. The collapsible plowing kit consists of 2 groups of elements of 3 working units each.
The Viking HB 585 cultivator Motoblock Centaur MB 1080D has a built-in vibration damping system that reduces the sound power level to 93 dB and the sound pressure level to 80 dB. If a trailed model for a tractor is required, there is a stubble cultivator.
Description of walk-behind tractor brand 585
The Viking 585 walk-behind tractor is a fairly compact model, the working width of which is equivalent to 850 mm. Using the equipment, you can process fairly wide areas. You can adjust the width from 350 to 600 mm. To do this, the operator will have to install the walk-behind tractor in the service position, and then open the cotter pins and remove the plowing kit.
Read also: Motoblockb MTZ: review of technical characteristics of models
It is shortened by the required number of cutting elements. Among the advantages of the described equipment, one should highlight the presence of protection against simultaneous pressing of the control handle. The rowing knife is quite powerful, this increases the productivity of the device. A metal hard casing protects the working person, which is also ensured by the presence of polymer protective wings.
Attachments for the Viking HB 585 motor cultivator
Also check out these articles
- Corn header
- Combine harvester New Holland CR 9080
- Tractor MTZ 82
- Tractor T-170
The Viking HB 585 cultivator can be additionally equipped with auxiliary devices that expand its capabilities. The first type of attachment is an additional load. These are 2 parts weighing 9 kg each, used to increase pressure. Shed No. 2 – Hiller. It is necessary for creating planting furrows, loosening the boundaries at the same time as sprinkling soil on the root part of the crops and their hilling. Canopy No. 3 - lugs, made in the form of metal wheels with blades, providing optimal traction with the ground.
If you need not a cultivator, but a walk-behind tractor, you should look at the Centaur MB 2070B walk-behind tractor.
Pre-sowing cultivator Unia Viking 5.3 / 5.8 / 6 / 6.3 / 6.8 / 8
Home // Catalog of agricultural machinery // Cultivators // Cultivators for continuous cultivation
price
from 1,090,000 rub.
Order
Call
| Indicator / Model | Viking L 5.3H | Viking L 5.8H | Viking L 6.3H | Viking L 6.8H | Viking L 8H |
| Price | on request | on request | RUB 1,090,000 | RUB 1,150,000 | RUB 1,410,000 |
| Working width, m | 5,3 | 5,8 | 6,3 | 6,8 | 8 |
| Productivity, ha/h | 3,71-6,36 | 4,13-7,08 | 4,41-7,56 | 4,76-8,6 | 5,9-9,6 |
| Number of paws, pcs. | 65 | 71 | 79 | 85 | 98 |
| Tillage depth, cm | 4-15 | ||||
| Number of rows of working bodies, pcs. | 5 | ||||
| Aggregation, hp | 110-140 | 120-160 | 155-190 | 155-190 | 185-225 |
| Weight, kg | 1860 | 1920 | 2000 | 2060 | 2350 |
| Indicator / Model | Viking XL 6H | Viking XL 8H |
| Price | RUB 1,400,000 | RUB 1,730,000 |
| Working width, m | 6 | 8 |
| Productivity, ha/h | 3,78-5,66 | 5,12-7,68 |
| Number of paws, pcs. | 30 | 40 |
| Tillage depth, cm | 4-15 | |
| Number of rows of working bodies, pcs. | 4 | |
| Aggregation, hp | 160-190 | 200-230 |
| Weight, kg | 3000 | 4300 |
The pre-sowing cultivator Unia Viking 5.3 / 5.8 / 6 / 6.3 / 6.8 / 8 is designed for cultivating all types of soils (including heavy ones) and is characterized by increased tillage efficiency. There is a leveling bar in front of the cultivator, and a press roller at the rear. The processing depth depends on the selected type of working tools:
- paw SV 45×10 mm – designed for super light and light soils, tillage depth 4-8 cm;
- SK paw 45×10 mm with a 100 mm crow's foot - effectively loosens the soil, as well as crushes crop residues for super light and light soils, tillage depth is 4-8 cm;
- paw SL – provides high-quality loosening of the soil and chopping of crop residues for medium-heavy and heavy soils, tillage depth is 12-15 cm.
The S-shaped tine stand guarantees reliability and high quality tillage. The chassis system ensures 100% ground contour following and high operating speeds of up to 15 km/h.
All cultivators are hydraulically foldable, with a transport width of up to 3 m.
Standard equipment:
- Hitch type towbar ø40 mm;
- front leveling beam;
- 5 rows of spring working bodies SV (L models);
- 4 rows of spring working bodies SL (XL models);
- rear press string roller ø320 mm (L models) or ø390 mm (XL models);
- trolley with double support and transport wheels 200/60-14.5;
- single side wheels 200/60-14.5 (models up to 6.8 m);
- double side wheels 200/60-14.5 (8 m models).
Additional options:
- set of SK teeth (L models);
- 3-row rear spring harrow (XL models);
- trace eradicator kit (XL models);
- front hydraulic spring drag (instead of the front bar);
- set of spring raking teeth;
- set of trace eradicators;
- drawbar with hitch type ø50 mm;
- lighting set (reflective plates).
Manufactured by Unia (Poland).
see also
Heavy stubble cultivator Unia KOS 2.1 / 2.6 / 3 / 3.7 / 4.5 / 5.4 / 6
Cultivator for inter-row processing of beets USMK-5.4 / 8.1
Cultivator for pre-sowing soil cultivation KPS-4U / 5U
Technical characteristics of the Viking HB 585 motor-cultivator
- Engine - Kohler Courage XT-6 OHV;
- Working volume - 149 cc;
- Engine type - 4-stroke;
- Rated power - 2.4 kW at 3000 rpm;
- Number of gears - 1 forward / 1 reverse;
- Fuel tank capacity - 1.1 l;
- Clutch - Belt;
- Reducer - Worm;
- Adjustable steering column - in 2 positions, folding;
- The working body is a split plowing set;
- Processing width - 60/86 cm;
- Processing depth - up to 32 cm;
- Tilling kit (diameter) - 32 cm;
- Starting device - cable start (easy start);
- Weight - 49 kg.
Model range overview
Viking HB 585
The petrol Viking HB 585 has a power of 3.3 hp (2.3 kW). Engine model: Kohler Courage - XT-675 OHV SC.
Engine parameters: four-stroke, overhead valve, 149 cc, cast iron liner, forged crankshaft. The engine is protected by a casing and side covers made of polymer material. The weight of this modification is 49 kg. There is a manual start.
Viking HB 560
The petrol Viking HB 560 is equipped with a 2.4 hp engine. Engine model: Kohler Courage XT-675 OHV SC.
Engine parameters: four-stroke, air cooling, cast iron cylinder liner, volume - 149 cm3. The weight of the unit is 47 kg. There is a manual start.
Viking HB 685
Viking HB 685 - gasoline Kohler Courage XT-800 OHV SC, with an engine capacity of 149 cc.
Engine parameters: power 3.9 hp, overhead valve placement, protective casing. Walk-behind tractor weight: 49 kg. Starting the engine manually.
Viking HB 445 R
Viking HB 445 R - power 2.5 hp. Briggs&Stratton Series 450 petrol engine with a cast iron cylinder liner, protected by a casing, engine capacity 158 cm3.
Machine weight 41 kg. The main purpose of the walk-behind tractor: cultivation, hilling. The launch is done manually.
Viking VH 540
Viking VH 540 - petrol. Engine Briggs & Stratton Series 450, with a power of 4.9 hp. The engine is four-stroke, its volume is 205 cm3. The walk-behind tractor weighs 56 kg and has a manual start function.
Viking VH 660
Viking VH 660 - gasoline, with a Briggs&Stratton Series 800 engine, power 4.9 hp, engine capacity 205 cm3. There is a manual start. The weight of the walk-behind tractor is 71 kg.
Viking VH 440
Viking VH 440 - 3.5 hp model. Engine Briggs&Stratton 475 Series, four-stroke, with a displacement of 148 cm3. and air cooling. Starting the engine manually. Unit weight 39 kg.
Viking VH 400
Viking VH 400 - power 3.5 hp, engine capacity 148 cm3, cooling type - air blowing. Four-stroke engine Briggs&Stratton 475 Series, model weight 39 kg.
Reviews of the Viking HB 585 motor cultivator
Sergey: Use of the device - 1 year Advantages: convenient, lightweight Disadvantages: quick wear of spare parts Review: I chose a cultivator a year ago. I liked this one right away. His handles are comfortable. Of course, you have to change spare parts. But at a pace like mine, this is a normal thing.
Nikita: Using the device – 3 months Advantages: beautiful, convenient Disadvantages: haven’t discovered it yet Review: The Viking HB 585 cultivator, a new thing on my farm, was used for planting potatoes. The first impression is great. I like the way it works.
