The MTZ-152N minitractor is a new machine in the range of compact special equipment produced by the Smorgon Tractor Plant. The model specializes in performing not too labor-intensive tasks in the field of agriculture. In almost all types of work, the minitractor is equipped with appropriate mounted and trailed units, of which there are many different types and variations.
The MTZ-152N minitractor has an all-wheel drive system, which provides it with fairly high maneuverability on various types of soil. The equipment belongs to the 0.2 traction class and has quite excellent performance indicators for its segment. The standard equipment of the machine includes a special roll bar that protects the driver from serious injuries when the equipment rolls over. This can happen when working on slopes or on soils with reduced bearing capacity, using heavy units. The brake system and chassis of the model were significantly improved, as a result of which the equipment received increased cross-country ability during the autumn-spring period of operation. In terms of overall dimensions, the minitractor turned out to be quite compact, which directly affected maneuverability. Thus, MTZ-152N fits perfectly into work in gardens and private plots.
Purpose
The MTZ-152N minitractor was specially designed for operation in fairly small areas. However, at the same time, the equipment turned out to be very multifunctional, as it is capable of performing an impressive list of technological and transportation work in such areas as:
- Agriculture. In this area, equipment is often used for plowing and pre-sowing soil treatment, sowing operations of various crops, cultivation, inter-row cultivation, as well as for applying any fertilizers. To perform all these tasks, the tractor uses mounted and semi-mounted units mounted to the rear linkage system. Their operation is facilitated by an on-board hydraulic system, the operating pressure of which reaches 20 megapascals. The hydraulic pump has a capacity of 8 liters per minute, which is quite good.
- Utilities. To work in this area, a necessary criterion is often the presence of a power take-off shaft, which is precisely present in the MTZ-152N model. The existing PTO in independent mode rotates at a frequency of up to 1168 revolutions per minute, when in synchronous mode this value is 7 revolutions per meter of travel. The model is used in conjunction with various snow removal equipment (in particular, a type of frontal plow), as well as with a utility brush, which is necessary for cleaning street and yard areas from various contaminants.
- Freight transportation. The MTZ-152N minitractor has very good traction and coupling characteristics and special devices that make it possible to transport any cargo using either tractor or car trailers and semi-trailers. The rear linkage is designed for loads up to 300 kilograms. With this weight, the model can climb a slope with an angle of 12 degrees without any difficulty.
- Industrial enterprises. In this area, as in the previous one, the machine is used to carry out transportation work. Here the machinery carries out the transportation of raw materials and various products. The tractor enjoys considerable popularity mainly due to its maneuverability, since it will not be difficult for it to turn around in a limited working space. In addition, MTZ-152N is also used with a welding inverter, electric generator, air compressor and many other stationary equipment.
In its class, this mini tractor has a fairly high ground clearance of 300 millimeters under the front wheel axle. With this indicator, the equipment can effectively process low-growing crops. Mostly, owners use the technique for planting and digging potatoes and inter-row cultivation of any vegetation. Thanks to the small turning radius and large overall dimensions, the machine is able to maneuver between trees in garden plots.
Showed himself in the potato fields
Its owner, who grows potatoes for sale in the Tambov region, speaks very positively about the MT3-152. Several long, extensive vegetable gardens with potatoes became exactly the place where this compact tractor fully demonstrated its positive qualities. Namely - maneuverability, high maneuverability, versatility, efficiency and profitability in operation. Gasoline consumption (and the engine on this mini-tractor is gasoline) is consistently low when performing any operation. Experience shows that an hour of operation of the Belarus MTZ-152 mini-tractor uses 3-4 liters of gasoline (92). Testimonies from other owners generally support these figures. One full tank is enough for 5 or 6 (maximum) hours of operation under load.
We recommend reading: Doosan 225: technical specifications
Belarus MTZ-152 performs a full range of work on processing large potato gardens, more like fields. This includes pre-sowing soil treatment: plowing, cultivation. And plant care: inter-row weeding and hilling, fertilizing and spraying against the Colorado potato beetle. And digging up root crops too.
Specifications
Engine characteristics:
- The type of engine installed is gasoline, in-line.
- The brand of the installed engine is GX390.
- Number of cylinders: 1 cylinder.
- Maximum power - 13 horsepower / 9.6 kilowatts.
- The working volume of the cylinder is 390 cubic meters.
- The highest crankshaft rotation speed is 3650 rpm.
- Cooling system type: air.
- Type of injection system: carburetor.
- Starting system type: manual.
Transmission characteristics:
- The type of gearbox installed is mechanical.
- Drive type: cardan drive.
- The differential lock is mechanical.
- Number of forward gears - 4.
- Number of reverse gears - 3.
Power take-off shaft characteristics:
- The number of power take-off shaft speeds is 1.
- Control is mechanical.
- The highest PTO rotation speed is 1168 rpm.
Performance characteristics:
- The structural weight of the mini tractor is 560 kilograms.
- The operating weight of the mini tractor (with ballast weights) is 710 kilograms.
- The operating weight of the mini tractor (without ballast weights) is 650 kilograms.
- The maximum weight of the mini tractor is 800 kilograms.
- The type of hydraulic system used is separate unit.
- Brake type: drum.
- The lowest speed of independent forward movement is 2.96 kilometers per hour.
- The highest speed of independent forward movement is 18.46 kilometers per hour.
- The lowest speed of independent movement in reverse is 4.2 kilometers per hour.
- The highest speed of independent movement in reverse is 13.47 kilometers per hour.
- The lowest fuel consumption per working hour is 2.8 liters.
- The highest fuel consumption per working hour is 3.2 liters.
- Rated tractive effort - 2 kilonewtons/203.9 kilograms.
Additional uses
It is clear that the compact MT3-152 tractor is capable of significantly reducing the time and labor costs for growing and harvesting crops from large vegetable gardens, as well as quickly clearing large areas of snow in winter. In addition, manufacturers pay attention to the fact that the tractor can work with various types of mowers; with a utility brush, and also, via a PTO (as standard), with welding, compressor and many other stationary equipment. The maximum power take-off speed is 1168 rpm.
We recommend reading: YaMZ-650: technical characteristics
Device Features
The MTZ-152N minitractor is equipped with a separate hydraulic system equipped with an NSh6-3-L gear hydraulic pump, a hydraulic distributor and one hydraulic cylinder that controls the mounted units. It should be noted that separate hydraulics are used on many modern models of mini tractors, since they are much more efficient. As additional options, the consumer is offered a front hitch.
This version differs from its previous model in the following advantages:
- Technical and operational characteristics have been significantly increased.
- The manufacturer has significantly reduced the turning radius of the machine, making the equipment very convenient to use in confined working spaces.
- The driver's seat received special springs, which had a positive effect on work comfort.
A single-stage gearbox with spur gears is installed on the front axle. The center differential of the drive axle traditionally has a mechanical locking function, which the driver can turn on and off independently. The final drives are single-disc type gearboxes, which also have spur gears. The torque from the power plant is transmitted to the rear axle (if it is engaged) through the secondary shaft of the gearbox.
The equipment is controlled by a special operator located under the driver’s seat. This machine can be equipped with two types of seats. Both offered types are equipped with several adjustment modes (vertical and horizontal). The seats are also equipped with a special suspension that provides increased comfort when performing any work.
The dashboard of the MTZ-152N minitractor has a block of control lamps and a working hours counter. There is a special panel on which there are buttons for turning on the alarm, stopping the power unit and turning off the electric starter and all devices. The controls have a very convenient location, which, together with the adjustment of the driver's seat, allows you to take the most comfortable position.
This model has gained considerable popularity on the Russian market due to the optimal price-quality ratio. According to this indicator, the Smorgon mini tractor can compete very strongly with various foreign analogues from this segment.
Dimensions:
- The structural length of the mini tractor is 2450 millimeters.
- The total width of the body is 990 millimeters.
- The total height (along the steering wheel) is 1350 millimeters.
- Total height (along the roll bar) is 1970 millimeters.
- The lowest ground clearance under the front axle is 300 millimeters.
- The lowest ground clearance under the rear axle is 280 millimeters.
Attachments
The attachment package consists of many different units, most of which are mounted on the rear linkage. All provided blades are installed exclusively in the front part. It is also worth noting that some equipment requires a power take-off drive. Among these, we need to highlight a potato digger, a potato planter, a tillage cutter and utility brushes. Other additional equipment is a plow, cultivator, hiller, and harrow.
Cabin
As for the cabin, the design of the machine does not provide for its installation. However, there is an opportunity to correct this shortcoming. To do this, you will need to order separately or purchase a ready-made protective visor. This device will allow you to reliably shelter the operator from the rays of the scorching sun and will save him from rain getting inside the unit.
Advantages and disadvantages
The Belarus 152 tractor has a number of undeniable advantages:
- decent power;
- light weight;
- good maneuverability;
- high level of cross-country ability
- a large number of aggregated equipment;
- economical fuel consumption;
- at an affordable price.
The disadvantages of the car include such factors as incorrect operation of sensors, problems with electrical components and an insufficiently comfortable seat for the driver. A user who is able to correctly select the direction of activity of this unit can count on high efficiency of work and a significant economic effect from its use. This is especially true for the present time, since more powerful types of equipment require a significant amount of fuel and lubricants and decent financial investments for the maintenance of units.
About the manufacturer of MTZ-152 – Smorgon Aggregate Plant
The Smorgon aggregate plant is located in the city of Smorgon, Grodno region, 120 km from Minsk. This machine-building enterprise is part of the MTZ holding. Its main specialization is the production of small-sized agricultural machinery; mounted, semi-mounted and trailed equipment for it, trailers.
The company produces mini-tractors and walk-behind tractors, Belarus MTZ-921 garden tractors, loader buckets, mining special vehicles; as well as individual components, parts and assemblies for delivery to the main conveyor of the Minsk Tractor Plant.
We recommend reading: Excavator EO-4121: technical characteristics
The company has been operating since 1986, and from the very beginning - as a branch and an integral part of MTZ. The non-standard equipment workshop of the Smorgon plant was the first to produce products. The first mini-tractor was produced here in 1992. It became “MTZ-082”. The company has been producing car trailers since 1991; walk-behind tractors - since 1996. Today, the Smorgon Aggregate Plant, which occupies an area of 79 hectares, employs over 1,100 workers.
