Huter chainsaws: review of the model range

Huter chainsaw

For a long time, Huter specialized in the production of electrical equipment, gasoline and diesel generators. People first started talking about this company in 1979, but the company began supplying products to the international market ten years later - in 1989. By that time, a large plant had already been built in Erfurt, which made it possible to expand the range of goods produced.

Huter chainsaws

Huter appeared on the territory of SND in 2004 and immediately attracted attention with the high quality of the products supplied. In recent years, due to the expanding demand for garden equipment, the company has opened a factory in China, where most models of electric chainsaws and chainsaws are assembled. Chinese assembly is of fairly high quality; all technological processes are controlled by German engineers and mechanics. Today, Huter products are certified in most countries of the world; they meet all modern quality and safety standards.

Electric snow blower Huter SGC 1000E

Snow blower Huter sgc 6000

Motoblock Huter GMC-9.0

We are pleased with the wide range of equipment from Huter. In addition to chain saws, the plant's workshops produce snow blowers, stabilizers, gas generators, trimmers, high-pressure washers and much more. An important factor that increases demand for the company’s products is a reasonable pricing policy. Even professional-grade tools are available at affordable prices.

In domestic stores, chainsaws can cost from 5,000 to 8,000 rubles, depending on the model.

Model range overview

As we have already noted, the company focuses on the production of electrical equipment. Equipment such as chain saws is not a priority, and therefore only six models of Hooter chainsaws are available on the market. They differ in their purpose, operational and technical characteristics, but they are united by consistently high quality.

Chainsaw Huter BS-40 in operation

Advantages and disadvantages of the Huter chainsaw:

• Stylish design and ergonomic body;
• Serviceable tire with driven sprocket;
• Comfortable rubberized handles;
• Thoughtful placement of controls;
• Effective multi-point vibration damping system and protection against saw kickbacks;
• Clear Russian-language manual;
• Acceptable price.

Disadvantages of the Huter chainsaw:

• The heavy weight of the Hooter chainsaw;
• Some models have a poor starter design;
• Low quality chain in the basic configuration.

Huter BS-52

The models that are in greatest demand among buyers include the BS-52 chain saw. This is a high-quality, inexpensive tool that can cope with most tasks.

Chainsaw Huter BS-52

The chainsaw has a powerful (3.4 hp), high-speed engine, and is equipped with modern safety and vibration protection systems. High quality and excellent performance characteristics are combined with a budget price; today this saw can be ordered at a price of 5,900 rubles.

Characteristics

Huter BS-25

The most compact and lightest chainsaw in the manufacturer's catalog. For its small size it received the nickname “pocket”. However, its performance characteristics look very impressive.

Chainsaw Huter BS-25

800 W motor. And the 30-centimeter tire allows you to use this tool to solve a wide variety of tasks. The price for a Huter BS-25 chainsaw starts at 6,570 rubles.

Chainsaw Huter Bs 45m won't start

Content

Chainsaw Huter BS-45: reviews, features, manuals, repairs

Today it is impossible to live without tools in a country house or a private farm. Every property owner in the city or beyond knows this. To prepare logs and create outbuildings you need a saw, ax or chainsaw

. The latter is more often purchased by electric models for the reason that it is not tied to a power source. However, gasoline units vary in weight and configuration, so determining the choice can be quite difficult.

If you have not yet decided which version of the equipment to purchase, then you need to understand where the device will be used. The weight and power of a chainsaw are designed for different applications. Manufacturers supply the market with three groups of tools, each of which copes with the assigned tasks, so it is important to determine what kind of work you will perform on the site using a chainsaw.

For small garden work, a low-power amateur chainsaw is suitable. It is intended for periodic operation, which does not exceed an hour per day. On the market you can find a semi-professional tool that can help even when building a house. If you are just at the initial stage of construction, it is recommended to buy just such a chainsaw, which can weigh about 6 kg.

With a professional saw, you can even demolish a forest. With this manipulation, the saw will work all day long. If you are still unable to decide which device to buy, you should stop focusing on the Huter BS-45 chainsaw that will be reviewed below. Its cost is only 4,700 rubles.

Description of the BS-45 chainsaw

If you need a chainsaw, you should pay attention to the model mentioned above. It is powered by an engine with a power of 2.3 liters. from. The tool is intended for household use, for example:

• small construction;
• garden care;
• sawing wood for the fireplace.

The chain saw has a chain brake, which ensures safe operation. The manufacturer made sure that the kit included a 45-centimeter tire. Among other things, the chainsaw has an anti-vibration system.

Characteristics

Huter BS-45. The chainsaw, reviews that you can read about in the article, has very outstanding technical characteristics. In particular, it should be noted that the groove width is 1.5 mm. Number of links. 72.

Chain pitch is equivalent to 0.325 inches. The tire length is 18 inches. The fuel tank capacity is 0.55 liters. Chainsaw power. 1.7 kW. Quite often, professionals are interested in engine volume, in this case this parameter is 45 cm3.

Reviews about the model

“Hunter” saw in the article, according to consumers, many positive features, among which it should be noted:

• convenience;
• efficient cutting;
• safe work;
• secure hold.

As for convenience, this is ensured by the presence of an air filter, which is reliably protected by a special shell. The latter can be easily opened using a rotary wheel. According to home craftsmen, the model described in the article allows for efficient cutting. Suitable chainsaw for pruning small trees and collecting firewood.

READ How to Lubricate a Chainsaw Chain

The Huter chainsaw is often chosen by customers also because it provides safe operation. If there is any influence on the front fence, then the brake will instantly engage and the saw chain will stop. The manufacturer has taken care to securely hold the tool in your hands. This was made possible thanks to the handle, which has a rather convenient shape. The bottom of the handle expands to provide protection for the operator's hands when the chain is broken. The described chainsaw, a photograph of which is presented in the article, according to experts, has many additional advantages, among which we cannot fail to note:

• automatic chain lubrication;
• controls located on the handle;
• light weight;
• vibration damping system;
• reliability and ease of use.

Chainsaw repair

The chainsaw, a photograph of which you can find in the article, has a spark plug. When a tool breaks, that particular part of the mechanism needs to be checked first. To do this, the wire is disconnected and the spark plug itself is unscrewed with a key. If it is coated with black carbon, this may indicate the use of low quality oil. Sometimes black carbon is indicated by incorrect calculation of the oil to gasoline ratio and improper carburetor adjustment. The spark plug is washed and cleared of deposits with a needle or awl, only after you wipe the electrodes with sandpaper.

If it is dry, then the fuel mixture does not enter the cylinder. The problem in this case is not in the ignition system, so the spark plug can be installed back.

If the spark plug was splashed with fuel, the excess mixture can be explained by a violation of the starting rules or incorrect carburetor adjustment. The spark plug should be wiped, the fuel supply turned off, and the starter engaged so that excess fuel can be removed. Once the combustion chamber has been checked, the spark plug can be replaced and the equipment can be restarted. Repair of the Huter BS-45 chainsaw can always be carried out independently.

BenzoPila won't start! Fast and effective repairs for free!

Spark plugs for chainsaws

here About the development of the channel.

Reason caused by saw chain

Don't start the chainsaw

cause.
chainsaw
shows no signs of life. The cause of the problem has been found.

Fuel supply and repair system

If you are experiencing a problem where fuel is not getting into the cylinder, it may be due to a dirty filter. To solve the problem, the fuel hose is removed, which allows you to check how the fuel flows. Cleaning the filter is required if the stream is quite weak. It should be removed or replaced with a new one.

The fuel filter is replaced every three months. Fuel may be absent or present in insufficient quantities. The cause is a clogged air filter. When air stops flowing into the carburetor, the engine does not run properly. The filter should be removed, cleaned in water, then dried and replaced.

Cleaning the muffler

Often, novice home owners wonder why the chainsaw dies. At low speed the tool may work flawlessly, but overall it starts to stall. A muted muffler spark arrestor may cause malfunction. The muffler should be removed, disassembled and cleaned of detergents. The device is dried and installed in place.

It is important to remember that dry cleaning should not be performed because carbon deposits contain carcinogens and are hazardous to health if inhaled. After removing the muffler, the socket should be covered with rags. Huter chainsaws, which are often reviewed most positively, have a silencer. Its clogging can be prevented by following the fuel mixture. The oil volume should not exceed normal. If you use low quality oil, it can negatively affect the performance of your engine.

READ Poulan Chainsaw Carburetor Adjustment

Dismantling the chainsaw

Any equipment from time to time requires repair, which is accompanied by disassembling the equipment. If we are talking about the described chainsaw, first you need to remove the handle, which is secured to the body with three rubber shock absorbers. To do this, remove the plastic plugs and then use a screwdriver to pry out the top shock absorber and the one closest to the rear handle.

In the next step you can start removing the top cover of the case, to do this you need to unscrew the four screws. The starter is easy to remove, there shouldn't be any problems. Then you can unscrew the inner cavity. The flywheel is twisted with force, so you need a head with a metal collar to remove it.

Once the piston is locked in the cylinder, you can remove the flywheel nut. It is recommended to remove the drive sprocket before dismantling the clutch. To do this, the lock washer is removed and the sprocket is removed, as well as the needle bearing. To remove the carburetor you need a 8 socket and an extension. But first, disconnect the ignition wire and the choke link. Assembling the Huter BS-45 chainsaw is performed in the reverse order.

Chainsaw instruction manual

The oil tank capacity of the described chain saw model is 0.2 liters. However, this information is not the only information that the consumer needs to know for the device to operate correctly. It is also important to read the manufacturer's instructions. From it you can learn about safety requirements. For example, it is prohibited to use the machine in areas with flammable or explosive substances. Conditions exposed to splashes and dripping are also not suitable for operating chainsaws, as well as open areas exposed to precipitation.

If during operation you notice any equipment malfunctions, then use of the tool should be stopped. These cases include housing cracks, chain slippage, tire deformation, fuel leakage, and abnormal noise. It is important to ensure good lighting of the work area. The product must not be overloaded. It must be used strictly for this purpose. The workplace must be clean. Before turning on the chainsaw, it is worth checking whether you forgot to remove the screwdriver, keys and other tools from the work area.

Recommended fuel mixture

Reviews of the Huter BS-45 chainsaw should help you make the right choice. But when working, he must be guided by the manufacturer’s recommendations. From them you can learn that you need to use the tool with a properly prepared fuel mixture. The oil must be of high quality and suitable for two-stroke air-cooled engines. Do not use oil for water-cooled engines. The oil must be certified according to the API classification (JASO), otherwise the operation of the equipment may result in the engine running with low lubrication levels.

The manufacturer recommends using unleaded high-quality gasoline AI-92. When preparing the fuel mixture, you must use the gasoline to oil volume ratio specified by the manufacturer. If you don't see oil packaging information, use a ratio of 40 to 1 (gasoline/oil). A It is recommended to use a graduated measuring container for mixing. Do not mix ingredients in the fuel tank.

READ Chainsaw Chain Riveter Video

Filling the fuel tank

The Huter chain saw , the instruction manual for which is included, must be used with a fuel mixture poured into the tank in accordance with the technology. The product should be placed horizontally with the tank lid facing up. You must first turn off the engine and make sure that there are no open flame sources nearby. The mixture should be prepared in such a volume that it is enough for one filling. Fuel should not be left in the equipment tank.

Recommendations for work

Huter chainsaws, reviews that you could read about above, must be operated in accordance with the instructions. From this you can understand that you need to hold the device with both hands. If you do not control the process of sawing the material, then rollback may occur. When the chain brake is operating, it will protect the operator from possible impact.

The chain may become pinched by the log if the sawing is not done correctly. To exclude such a development of events, it is important to determine how you will see the wood. You can start the process from the top, this is done by cutting a quarter of the diameter of the log. When sawing it is not worth the effort, the saw under its own weight will allow you to complete the sawing process. If the chain has become jammed, the engine should be stopped and the magazine position repositioned.

Service

Reviews of the Huter BS-45 chainsaw often help consumers make the right choice regarding this model. If you have already become the owner of such equipment, you should learn more about the maintenance features. It is important that the lubrication holes remain clean. They should be free of pieces of dirt, foreign objects and oil clots.

Lubrication holes should be checked regularly and cleaned if necessary. Using a grease gun, the operator must lubricate the tire sprocket. Such manipulations must be carried out before sawing begins. To regulate the amount of oil supplied to the circuit, use a pump regulator. To increase or decrease the amount of oil, the bolt must be turned in one direction or another.

Cost of spare parts and equipment

Quite often, consumers buy a handsaw to sharpen chainsaws. Its cost may vary, but the most common models have a price from 800 to 2000 rubles. When choosing these devices, it is important to pay attention to the number of revolutions per minute. In the case of the “DIOLD MZ-0.13” model, this parameter is 2500. Its power is 130 W.

Another manual machine for sharpening chainsaw chains. "DIOLD MZS-01". Its cost is equivalent to 2200 rubles, and its power. 70 W. You may also be interested in spare parts for Huter BS-45 chainsaw. For example, a piston can be bought for 400 rubles. But the piston group will cost 1,100 rubles. Piston rings are supplied to the market at a price of 150 rubles. A cylinder costs about 700 rubles, while a crankshaft costs 650 rubles.

User manual

You are buying a rather expensive unit, so we advise you to carefully inspect the chainsaw for visible damage and malfunctions. If any are found, contact the seller with a request to eliminate the defect or replace the chain saw. However, according to the law, you will have 14 days from the date of purchase to return the product if a manufacturing defect is discovered.

Chainsaw device

Before operating a chain saw, carefully read the manual, study the device and safety rules when working with such tools at the link: Your browser does not support frames

Your chainsaw is delivered assembled; the new owner only needs to mount the saw set.

Description

The HUTER BS-52 chainsaw is a durable and powerful unit that will allow you to cope with tasks of any level of complexity.
It has a durable design and excellent maneuverability. Rubber shock absorbers located between the handles and the saw housing reduce the harmful vibration load when working with a chainsaw and make work more comfortable. The oil tank is located in the front of the crankcase. Forced lubrication of the chain and bar is used to reduce friction between them, which increases the service life of the saw set. An easy start affects the launch speed, especially in winter. It adds additional torque when jerking.

A lot of attention is paid to safety in this model. The gas trigger lock prevents accidental pressing. The function of the mechanical inertial chain brake is also important: when the saw rebounds sharply during sawing (up and back), the hand rests on the brake handle and snaps it off, and the brake band tightens and brakes the clutch drum, stopping the chain almost instantly. The protective shield prevents injury in the event of a chain break or jumping off the tire.

Advantages: — Lateral location of the chain tension mechanism. — Combined carburetor flap control system. — The adjustable carburetor is convenient and easy to set up. — The manual fuel pump is designed to make the first start easier. — A metal oil pump provides a forced supply of lubrication to the chain and bar. — The quick-release air filter cover greatly simplifies air filter maintenance. — Quick-release air filter is easy to remove and easy to maintain. — The quick-release mechanism of the saw chain brake makes it easier to clean the saw from sawdust. — The shock absorption system consists of three damping bushings. A successful technical solution led to a significant reduction in vibration during engine operation and made work more comfortable.

Ivan Khmelkov, 46 years old, Yekaterinburg:

“My wife gave me the saw for my birthday. This is how it happens too - and you don’t have to laugh. I don’t know who chose her, but she bought it from Hooter. At first I was distrustful - Chinese assembly. But in operation the chainsaw performed very well. The engine is powerful, holds speed without problems, cuts smoothly. Huter has excellent body balancing, to a large extent, compensates for the considerable weight of the unit, so don’t be afraid - it’s not that heavy.”

Yakov Sinelnikov, 38 years old, Rostov region:

“I’ve been using the Hooter chainsaw for the fourth season. Mostly housework, firewood is brought in and needs to be cut. I mainly cut hardwoods. The engine is a beast. It doesn’t stall, doesn’t lose speed, and even starts in half a turn. At first I was surprised by the fact that I practically did not feel the vibration. The neighbor said that Hooter chainsaws are all like that - an excellent vibration damping system.”

Nikolay Kornilov, 32 years old, Primorsky Krai:

“I’ve had my Huter chainsaw for three years now, so I can judge it first-hand. Overall, a very decent unit for the money. First of all, it is worth noting the high-quality engine: it starts and runs flawlessly. A well-thought-out clutch system – no problems either. But the quality of the plastic on the oil line is poor, my oil is leaking. There are also complaints about the original chain - it sits down too quickly.”